Cognex Corporation

Lobby Renovations

JM Coull was selected by Cognex to perform a complete renovation of the main lobby, as well as the second, third, and fourth floor elevator lobbies, at the company's headquarters. The contemporary design incorporates custom features and the company's signature color palette, reflecting Cognex's brand as a cutting-edge leader in advanced machine vision and barcode reader technology.

Project Features

Expansion of first-floor product display area, including robotics display
Three-story, 3D illuminated pixel wall
Musical stairway
New finishes & furniture
Glazing system with custom film
Glass-enclosed conference rooms
Glass railings

Location: Natick, MA
Value: $2.0 million
Size: 10,000 sf
Delivery Method: Construction Management at Risk
Architect: Gorman Richardson Lewis Architects

E INK

New Innovation Center

JM Coull was awarded this contract by E Ink to renovate and consolidate two existing buildings into one 140,000 sf facility to house the company's new Innovation Center. The new two-story building serves as the US headquarters for this originator and pioneer in ePaper technology, and enabled the company to enhance its research and production operations. E Ink's technology is used in a range of industrial, mobile, retail, signage, and consumer products, including the Amazon Kindle.

Project Features

70,000 sf research lab & pilot production space
70,000 sf administrative space
Bench-top & walk-in organic chemistry fume hoods
Multiple energy recovery units (ERUs)
Explosion-proof interior chemical storage bunkers with containment
ISO cleanroom & gowning areas
Scanning electron microscope (SEM) room

Location: Billerica, MA
Value: $34 million
Size: 140,000 sf
Delivery Method: Construction Management
Architect: Industrial Facilities Design, Inc.

Waters Corporation

Low Volume Lab & Office Renovation

JM Coull renovated 6,500 sf of space at Waters' Taunton, MA location to increase efficiencies in the company's operations. Waters is a global leader in developing and manufacturing liquid chromatography, mass spectrometry, and thermal analysis. The company's products and services are used in a wide range of applications, including chemical, bio-pharmaceutical, health sciences research, and forensic toxicology, among others.

Project Features

Renovated labs with new process piping
Multiple fumehoods
Locker rooms & bathrooms
Offices & administrative spaces
New roof top HVAC system
Lobby renovations
Front walkway upgrades

Location: Taunton, MA
Size: 15,000 sf
Delivery Method: Construction Management at Risk
Architect: Industrial Facilities Design (IFDI) Engineer IFDI & 2020

Bose Corporation

Automobile Lab Facility

JM Coull constructed this 12,000 sf facility to house Bose's new automobile audio lab in Stow. The space is used for product development and testing.

Project Features

12,000 sf total
Clear span design for auto access
Specially sealed, sound-proofed testing rooms
Pre-engineered building
New offices

Location: Stow, MA
Size: 12,000 sf
Delivery Method: General Contracting
Architect: Symmes, Maini & McKee Associates

GT ADVANCED TECHNOLOGIES

Merrimack Facility Expansion

JMC constructed a new addition to accommodate GT Advanced Technologies' expanded production capacity as its world headquarters in Merrimack, NH. This high-tech company develops and manufactures crystal growth technology and advanced materials for the electronics, solar, and LED industries. The project involved significant HVAC and process systems work to support the company's enhanced operations.

Project Features

37,500 sf total
9,500 sf addition
Renovations to existing building
12 new furnaces
Four 1-MW Caterpillar standby generators
Two cooling towers
Two rooft op units
Installation of pumps, VAVs, and 12" PVC piping
Accommodated second project added midway

Location: Billerica, MA
Value: $34 million
Size: 140,000 sf
Delivery Method: Construction Management
Architect: Industrial Facilities Design, Inc.

GT ADVANCED TECHNOLOGIES

Executive Office Fit-Up

JMC performed this 13,000 sf executive office fit-up, incorporating many modern and high-end custom finishes. GT Advanced Technologies' Nashua location houses the company's offices for global sales of polysilicon equipment and technologies, silicon and sapphire crystal growth equipment, and silicon carbide crystal growth equipment for the electronics, solar, and LED industries.

Project Features

Board room with custom media wall
Executive conference room
Tel-video conference room
Private offices
Specialty LED lighting
High-efficiency, ultra-quiet HVAC system
Fireproofing
Completed on compressed schedule

Location: Nashua, NH
Value: $2 million
Size: 13,000 sf
Delivery Method: Construction Management at Risk
Architect: ci design

GT ADVANCED TECHNOLOGIES

Salem Office Fit-Up

JMC completed this project as the first of several for GT Advanced Technologies. This scope involved a complete fit-up of the company's Salem, MA location (GT Crystal Systems, Inc.), which specializes in advanced sapphire materials for the electronics, solar, and LED industries. An open design with improved efficiencies was created for the space to provide employees with an enhanced working environment.

Project Features

15,000 sf total
Open office area
Conference rooms
Private offices
Reception area
Storage facilities
Server room with raised flooring & self-contained air conditioner
Systems brought up to revised codes

Location: Salem, MA
Value: $1.1 million
Size: 15,000 sf
Delivery Method: Construction Management at Risk
Architect: ci design

Brooks Automation

Center for Manufacturing Excellence

This design-build project involved renovation for a new 18,000 sf production cleanroom with ancillary spaces to support Brooks Automation's operations. Cleanroom equipment for the new space was integrated from the company's facilities in California. The cleanroom was constructed to provide Brooks with increased functionalities for developing and manufacturing its advanced technology products that are used in the semiconductor, life sciences, and cryogenics industries.

Project Features

ISO 7 production cleanroom
ISO 6 & 5 high bay testing area
Addition to house MEP and process systems
New executive office space
Soft ware/product training spaces
Cafeteria
Storefront entrance
Multi-phased project completed on time & under budget within an occupied building

Location: Chelmsford, MA
Value: $3 million
Size: 55,000 sf
Delivery Method: Design-Build
Architect: Maugel Architects

Brooks Automation

Clean Manufacturing Facility

JM Coull performed more than 80,000 sf of renovations in an existing two-story building to provide Brooks Automation with enhanced space for its operations. The company required an upgraded facility for development and manufacturing of its products and solutions for the semiconductor, life sciences, and cryogenics industries.

Project Features

87,000 sf total
17,000 sf of cleanrooms
ISO 7 manufacturing facility
ISO 6 bays
ISO 5 packaging space
ISO 5 reliability lab
Engineering and R&D labs
New warehouse & distribution system
Process gases, liquids, and electrical power

Location: Chelmsford, MA
Value: $3.5 million
Size: 87,000 sf
Delivery Method: Design-Build
Architect: Woodbrier Associates

Dow Chemical

Advanced Technology Center

JM Coull was selected by Dow to construct the company's new state-of-the-art 64,000 sf, three-story microelectronics R&D facility in Marlborough. The Advanced Technology Center (ATC) provides space to conduct a variety of research, including work with anti-reflective coatings, lithography, and EUV and e-beam technologies. The facility is instrumental in the company's microelectronic, circuit board, and packaging and finishing operations.

Project Features

64,000 sf total
Eight scanning electron microscope rooms
5,000 sf ISO 4 "ballroom" cleanroom on waffle slab with mechanical equipment mezzanine above and process basement below
Stringent noise, vibration, temperature, and humidity control requirements
Modular cleanroom design for future expansion

Location: Marlborough, MA
Size: 64,000 sf
Delivery Method: Design-Build
Architect: Woodbrier Associates

Dow Chemical

193 Resist Auto Fill Line

JMC was called in by this longtime customer to demolish and build new Class I, Division I and Class I, Division II hazardous-use spaces within an existing building on Dow's campus in Marlborough. The facility supports the company's electronic materials business, and is used in Dow's microelectronic, circuit board, and packaging and finishing operations.

Project Features

ISO 4 cleanroom
Mezzanine
Trenching for new underground piping
Phased project schedule

Location: Marlborough, MA
Size: 1,800 sf
Delivery Method: Construction Management at Risk
Architect: Hart Design Group

Dow Chemical

Deep Ultraviolet Photolithography Semiconductor Fab

JM Coull completed the design and construction of the FAB 3-DUV, ISO 3 cleanroom for Dow's Marlborough campus. The company is a global supplier of enabling materials found in consumer electronics, flat-panel displays, and telecommunications.

Project Features

12,000 sf total
ISO 3 cleanroom
Temperature 68° ± 1/2° F and humidity 45% ± 1% RH
Strict limitations on vibration, molecular outgassing, sound levels, and room pressurization

Location: Marlborough, MA
Size: 12,000 sf
Delivery Method: Design-Build
Architect: Woodbrier Associates

Kokusai

Clean Manufacturing Facility

JM Coull constructed this ISO-certified 30,000 clean manufacturing building to support Kokusai's operations as a world leader of thermal processing technology, and batch and single water processing systems. The company also develops and manufacturers products and solutions for wireless communications, broadcasting and video systems, security/surveillance systems, financial information systems, and industrial video cameras.

Project Features

30,000 sf total
ISO 4, 5, and 7 clean space
Complete envelope construction
Clean construct protocol & trade coordination
Performed in occupied, operational building
Completed in phases

Location: Billerica, MA
Value: $2 million
Size: 30,000 sf
Delivery Method: Design-Build; Open book with GMP
Architect: The Benham Group

Skyworks Solutions

GaAs Pilot Fab Renovation & New Construction

JM Coull designed and constructed a 6" Gallium Arsenide (GaAs) Pilot Fab and completed associated support projects at Skyworks' global headquarters in Woburn, MA. The facility houses production operations for switches, control devices, amplifiers, and silicon wafers used in wireless networking. The company's products and applications support an array of markets, from aerospace and defense, to consumer electronics, to medical devices.

Project Features

ISO 4, 5, & 7 cleanrooms
New 1500-ton chilled water system
High-capacity steam boiler heating system
High-purity process systems
New DI water building
New site electrical substation
New construction & relocation of several existing cleanroom production spaces
Suspended catwalk system
Structural mezzanine for mechanical & electrical systems
Roof-mounted acid & general exhaust systems

Location: Woburn, MA
Size: 16,000 sf
Value: $8 million
Delivery Method: Design-Build
Architect: Woodbrier Associates

Skyworks Solutions

Wafer Fabrication Facility Expansion

JM Coull completed a project involving the design, permitting, and construction of a new 4" Gallium Arsenide wafer fabrication facility within an existing, fully operational fab. The wafers are used in wireless networking applications throughout multiple industries, including but not limited to aerospace and defense, automotive, media, consumer electronics, and mobile devices.

Project Features

14,000 sf total
New bay and chase photolithography cleanroom
New scribe and test cleanroom
New structural steel frame over cleanroom area
Make-up air systems
Recirculating air handlers
Cooling towers
Molecular Beam Epitaxy (MBE) area designed and constructed
Fab temperatures maintained at 68°F ± 2%
Low airborne molecular contamination, vibration, noise level, and UV light protection in photolithography cleanroom

Location: Woburn, MA
Value: $5 million
Size: 14,000 sf
Delivery Method: Design-Build; Open book with GMP
Architect: Woodbrier Associates

Skyworks Solutions

GaN Cleanroom Expansion

JM Coull demolished and expanded an existing space at Skyworks’ Woburn headquarters to construct a new ISO 5 GaN clean manufacturing suite. The billion-dollar company manufactures semiconductors for use in radio frequency and mobile communications systems across multiple markets, such as aerospace/defense, mobile devices, consumer electronics, smart energy, and wireless infrastructure.

Project Features

ISO 5 cleanroom
Demolition of existing non-clean space
Suspended walkable ceiling
Design-build trades – plumbing/process piping, sprinkler, electrical, and structural
Significant BIM use throughout preconstruction and construction

Location: Woburn, MA
Size: 1,500 sf
Value: $3 million
Delivery Method: Construction Management at Risk and Design-Build
Architect: SMMA

Applied Biosystems

Biotechnology Lab & Corporate Headquarters

JMC provided design, construction, and commissioning of a new corporate headquarters and laboratory facility to support Applied Biosystems' relocation to Bedford. Applied Biosystems, owned by Thermo Fisher Scientific, develops instruments and reagents for genetic analysis. The Bedford site created an advanced facility for the company's operations and production of human identification solutions, PCR systems, enzymes, and assays for a variety of applications.

Project Features

cGMP cleanroom lab suite
Molecular biology labs
Wet chemistry labs
Darkroom
Quality control lab
Explosion-proof hazardous waste storage
Offices & administrative areas

Location: Bedford, MA
Size: 30,000 sf
Delivery Method: Design-Build; Open Book with GMP
Architect: Woodbrier Architects

Medtronic Vascular Division

Manufacturing Facility & Office Fit-Up

This complex 80,000 sf renovation included a 30,000 sf, ISO 8 stent manufacturing cleanroom suite, as well as administrative spaces. The facility houses Medtronic's production of devices and therapies used by healthcare professionals that have been proven to improve clinical outcomes. The building use group for the existing facility was re-classified from class B to class B, S1, F-1, A-3, and H-2.

Project Features

80,000 sf total
30,000 sf ISO 8 manufacturing cleanroom suite
Chemical storage area
Wet & dry labs for development of stent implements
Multiple structural steel modifications
Complete fireproofing systems & electrical and communications systems upgrades
Additional administrative and ancillary areas

Location: Danvers, MA
Size: 80,000 sf
Delivery Method: Construction Management at Risk
Architect: Wessling Architects

Beckman Coulter

Genomic Servicing Facility Renovation & Fit-Up

JM Coull performed a gut renovation and fit-up to provide a new home for Beckman Coulter's expanded genomic servicing operations. A layered work plan was developed to accommodate a late request to shorten the original schedule by 20 days, enabling the company to keep up with customer demand. Beckman Coulter is a worldwide developer and manufacturer of products used in biomedical testing.

Project Features

Four BL2 labs with dedicated HVAC
10 specialty wet & dry labs
1,200 sf data server room with specialty HVAC & fire suppression systems
20,000 sf dedicated lab production space with standby generator and UPS back-up system
Noise & vibration controls
Dust & vapor mitigation measures
Two tenants adjacent to space, requiring extensive coordination

Location: Danvers, MA
Size: 55,000 sf
Delivery Method: Design-Build
Architect: Industrial Facilities Design, Inc.

Boston Scientific

Cell Biology Lab and Product Holding Facility

JM Coull renovated two existing areas located within Boston Scientific's previous headquarters in Natick. The company is a globally recognized developer and manufacturer of medical devices that are used across a range of medical specialties to improve patient outcomes. Boston Scientific supports healthcare practitioners in neurology, vascular, pulmonology, gastroenterology, cardiology, and orthopedics, among other disciplines.

Project Features

5,000 sf total
Specialty lab furniture & fixtures
Inventory control areas
Material lift & storage system
Secure holding & distribution systems
New HVAC, electrical, and process equipment
Performed in fully occupied, operational facility

Location: Natick, MA
Size: 5,000 sf
Delivery Method: Construction Management at Risk
Architect: Vanderweil Engineers

Bruker Daltonics

Corporate Headquarters & Manufacturing Facility

JM Coull constructed a 92,000 sf, three-story light manufacturing building and corporate headquarters for this leading analytical instrumentation company. The facility provides Bruker with increased space to develop innovative mass spectrometry solutions for the life sciences industry.

Project Features

1,500 sf ISO 8 production cleanroom
8,000 sf atrium & product demonstration area
Two-story parts delivery system
Tiered conference & training center
Green roof with 3D company logo
Tempered waterfall for year-round operations

Location: Billerica, MA
Value: $13 million
Size: 92,000 sf
Delivery Method: Construction Management at Risk
Architect: Woodbrier Architects

Pall Life Sciences

New England Center of Excellence

JM Coull was selected by Pall for 113,000 sf of renovations to its existing facility in Westborough. We enabled the company to maintain product development by expediting construction of one cleanroom; once validated by Pall, the balance of the cleanrooms were constructed. Pall delivers process solutions for biotech, pharmaceuticals, and biologics (plasma and vaccines), which have played a role in the development and manufacturing of life-saving drugs.

Project Features

10 ISO 7 cleanrooms
12 wet and dry labs
2 cold rooms

Location: Westborough, MA
Size: 113,000 sf
Delivery Method: Design-Build
Architect: Industrial Facilities Design, Inc.

PerkinElmer

Personalized Health Innovation Center of Excellence

JM Coull was selected by PerkinElmer to construct the company's new $14.9 million center of excellence in Hopkinton, where PerkinElmer's operations were consolidated from its California, Chicago, and Montreal locations. This multinational life sciences corporation provides innovative detection, imaging, and informatics systems for a range of applications, including newborn screening, cancer detection, infectious disease prevention, and cord blood and tissue banking.

Project Features

40,000 sf, two-story office addition – executive and corporate offices, conference and training rooms, fitness center with locker rooms, and cafeteria
15,000 sf warehouse addition & infill – automated racking system, new offices, and manufacturing space
16,000 sf lab & office renovations – three new labs, new offices, and new MEP and process systemsy
7,000 sf clean & non-clean production space – ISO 5 and 6 cleanrooms, upgraded electrical system, roof membrane replacement, and new power generator

Location: Hopkinton, MA
Value: $14.9 million
Size: 78,000 sf
Delivery Method: Design-Build and Construction Management at Risk
Architect: Gorman Richardson Lewis Architects

Millipore

Technical Training Laboratory

JM Coull rehabilitated a former industrial manufacturing space into a first class training facility for this manufacturer of wafer filtration systems.

Project Features

8,000 sf total
2,000 sf lab
Seminar room
Classrooms
New HVAC systems, including specialized exhaust system
Process piping

Location: Bedford, MA
Size: 8,000 sf
Delivery Method: General Contracting
Architect: DiMella Shaffer

Millipore

Amicon Integration Project

JMC renovated an existing industrial manufacturing facility to install new research, development, and production laboratories.

Project Features

45,000 sf total
Multiple labs
Demolition of hazardous materials bunkers
Remote-controlled robots used for demolition
Performed in fully occupied & operational facility

Location: Danvers, MA
Size: 45,000 sf
Delivery Method: Construction Management at Risk
Architect: DiMella Shaffer

Whitinsville Christian School - New Fine Arts Center & Gymnasium

JMC, working with Dixon Salo Architects, constructed Whitinsville Christian School's new 33,000 sf fine arts center and gymnasium. The theater includes a professional audio and acoustical system and provides a modern new space for the school's performances and musical productions. The gym is home to Whitinsville's boys and girls basketball teams, and hosts a variety of other athletic events.

Project Features

Performing arts theater – stage, seating, curtains, lighting system, audiovisual system
Gym – bleachers, basketball court, scoreboard, athletic equipment, training room
Lobby (joins theater and gym) – concession area and trophy display case
10,000 sf addition with enclosed connection bridge
Patio, ramp, handicap parking, new road and sidewalks
Three-phase design-build construction
Extensive site clearing
Existing gas service extension

Location: Whitinsville, MA
Value: $12.6 million
Size: 33,000 sf
Delivery Method: Design-Build
Architect: Dixon Salo Architects
Consultants: Nextstage Design, Acentech Studio A

Concord Academy

Campus Improvements

JM Coull served as construction manager for a number of projects at Concord Academy (an independent college preparatory school) located in the heart of historic Concord located in the heart of historic Concord. The 39-acre campus serves 400 students in grades 9 through 12, and brings a focus on creative problem solving and expression to its curriculum. The renovations provided students, faculty, and staff with updated spaces while still maintaining the historical aesthetics of downtown Concord.

Project Features

“Bride's House" - renovated to accommodate school's administrative o ces
Headmaster's House renovations
Student center expansion and renovation

Location: Concord, MA
Delivery Method: Construction Management at Risk

Smith College

Housing Renovations

JM Coull completed renovations to six Smith College residence halls under this “summer slammer" project.

Project Features

Upgraded student rooms
Renovated dining facilities
Updated common areas
Remodeled bathrooms
New kitchenette
Fast-track schedule

Location: Northampton, MA
Value: $1.3 million
Delivery Method: Design-Build
Architect: J. Ferrera Associates

“JM Coull's construction team worked tirelessly to bring our student housing upgrades to completion on time and under budget. Thank you!" – Karla Youngblood, Project Manager, Smith College

The Discovery Museum

Museum Renovation & Expansion

JM Coull was selected by The Discovery Museum for its 17,000 sf, multi-phase renovation and expansion project. The new space enables the museum to provide visitors with enhanced hands-on learning experiences. The project also achieves Discovery's mission to get children outside to play and explore their natural environment.

Project Features

Phase 1 – "Discovery Woods" ADA-compliant fully accessible playscape featuring a nature trail, willow tunnel, community swing, rain garden, and treehouse (built by The Treehouse Guys)
Phase 2 – 9,000 sf science museum addition and renovations, providing much-needed square footage for new and current exhibits. These new spaces support the museum's commitment to authentic, hands-on learning through play by focusing on early brain development, inventing/tinkering, math, and water & air

Location: Acton, MA
Value: $5.7 million
Size: 17,000 sf
Delivery Method: Construction Management at Risk
Architect: Cambridge Seven Associates, Inc.
Landscape Architect:Lemon|Brooke Landscape Architecture

University of New Hampshire - Gables Apartment Renovations

Gables Apartment Renovations

JM Coull renovated 101 apartments in the Gables A, B and C apartment buildings as a “summer slammer" project. JMC updated kitchens, entry closets, common rooms, bedrooms, vanities, showers, toilets, and interior corridors as well as the main hallway on each floor.

Project Features

3 buildings comprising 101 suites with 1,134 total rooms
54,000 total man hours
1,440 gallons of paint used
63 windows removed and installed
350 workers (at a minimum) involved
1,599 cabinets installed
153,990 sf carpet/tile/VCT installed
14,850 countertops and sill installed
All work completed in just 68 days

Location: Durham, NH
Contract Amount: $6.7 million
Size: 101 apartments
Delivery Method: Construction Management at Risk
Architect/Engineer: Harriman Architects and Engineers

University of New Hampshire - Smith Hall Renovations

Smith Hall Renovations

JM Coull transformed a former dormitory on the UNH campus into office space for several departments. The new space houses the Admissions Department, Counseling Center, the Center for Academic Resources, and Disability Services for Students.

Project Features

Office ce suite
Conference rooms
Presentation room
Reception area
Improved energy e ciency (digital controls, upgraded light xtures)
Fire protection system upgrades
Air-conditioning provisions

Location: Durham, NH
Size: 27,500 sf
Delivery Method: Construction Management at Risk
Architect/Engineer: Warren Street Architects

University of New Hampshire - Imaging Core Facility

Imaging Core Facility

JM Coull constructed UNH's Imaging Core Facility, located within the university's Instrumentation Center. The project involved relocation of UNH's transmission electron microscope to the space, as well as lab renovations to accommodate students' research. The space is primarily used by UNHs' chemistry and molecular, cellular, and biomedical sciences departments, but is available to industry and other academic institutions.

Project Features

Demo & reconstruction of existing storefront and stairwell
New partitions
Relocation of existing fume hood
New mechanical system & controls upgrades
Process piping (involved underground trenching from adjacent building utilities)
Exposed, painted overhead piping
“Cloud" acoustical ceiling tiles

Location: Durham, NH
Delivery Method: Construction Management at Risk
Architect: Port City Architects
Engineer: Allied Engineering

Boston University - Robotics Laboratory

JMC developed an existing ground–floor-level, vacant space into a new state-of-the-art robotics engineering R&D lab in BU's Engineering Product Innovation Center (EPIC). The lab is equipped with the latest technology and enables faculty and students to design, develop, and test their projects.

Project Features

5,000 sf
1,000 sf experimental arena with netted cage, 50 infrared cameras, and short-throw projectors
Lab/bench space for equipment and tools
Open work space and collaboration areas
Conference room
Kitchenette
Storage space
Fully integrated MEP/IT system, including LED lights, snorkel exhausts, compressed air lines, and video monitoring system

Location: Boston, MA
Size: 5,000 sf
Delivery Method: General Contracting
Architect: Wilson Architects

Boston University - College of Arts & Sciences Renovations

JMC renovated four traditional classrooms on the lower level of the CAS building to create two new lecture halls totaling 2,900 sf. The tiered-lecture setting in each room was designed to enhance professor/student interaction with clear visibility that accommodates student and faculty needs.

Project Features

Combined four CAS classrooms into two large lecture halls
Modern, updated finishes
New audio/visual systems featuring "smart" technology
Strategically placed white boards for collaboration
MEP systems upgrades

Location: Boston, MA
Value: $1.2 million
Delivery Method: General Contracting
Architect: Wilson Architects

Northeastern University - Egan Engineering/Science Research Center Laboratories

JM Coull provided gut renovations to six laboratories in the Egan Engineering/Science Research Center – Labs 157, 160, 216, 230, 231, and 464. JMC worked with Northeastern's commissioning agent to perform functional testing of all MEP systems and to ensure labs were operational prior to move-in day.

Project Features

5,600 sf total
Complete renovations to six labs
New fume hoods with occupancy sensors to control exhaust flow and sash positions
Updated finishes
MEP system upgrades
New epoxy flooring
Extension of existing nitrogen line from loading dock tank farm to Lab 231 and provision of future tees and valves for other labs
Aluminum & glass storefront to support Northeastern's "Science on Display" campaign

Location: Boston, MA
Delivery Method: General Contracting
Size: 5,600 sf
Architect: Linea 5
Engineer: BR+A and RW Sullivan

Northeastern University - Mugar Life Sciences Building & Forsyth Building Projects

JMC performed renovations to multiple classrooms, offices, and laboratories in the Mugar Life Sciences Building and Forsyth Building totalling more than 7,300 sf. The labs provide students and faculty with updated space to conduct a variety of important research, and the upgraded lecture hall and offices offer modern learning and working environments.

Project Features

Mugar Lecture Room 201 (1,700 sf) – upgrades to 187-seat lecture hall that serves science and engineering students
Forsyth Engineering Offices (3,700 sf) – complete renovation of existing labs to create office space for engineering department
Nanomaterial Lab for Catalysis & Advanced Separations – the renovated lab enables faculty to work with nanostructured materials for applications in clean and renewable energy
Polymer Chemistry & Nanobiotechnology Lab – interdisciplinary lab for research of preventative and therapeutic vaccines and drugs that can be released at specific times or when an external trigger is applied

Location: Boston, MA
Value: $2.1 million
Size: 7,370 sf
Delivery Method: General Contracting
Architect: Wilson Architects

Northeastern University - Hayden Hall 009 Classroom Renovation

Hayden Hall 009 Classroom Renovation

JM Coull renovated two classrooms in Hayden Hall 009, which involved demolition of flooring and abandoned utility piping, conduit, ductwork, and junction boxes. Existing equipment and furniture were also removed from the space.

Project Features

4,300 sf total
New casework partition with equipment storage dividing two classrooms
“Idea paint" marker board paint on select surfaces
Updated finishes
Upgraded MEP systems, including light fixtures & ceiling-mounted over- head projectors
Glass storefronts in each classroom
Vibrant, modern color palette
Accelerated schedule on busy college campus
Difficult access to project space, requiring careful arrangement of deliveries

Location: Boston, MA
Size: 4,300 sf
Delivery Method: Construction Management at Risk
Architect: Linea 5
Engineer: BR+A

Northeastern University - Lifespan Emotional Development Laboratory

Lifespan Emotional Development Laboratory

JMC constructed the Lifespan Emotional Development Laboratory (LEDlab) to accommodate the research of an incoming psychology professor at Northeastern University. The lab provided a new space for research on the links between attention and emotion throughout the adult lifespan to determine how individuals of different ages manage their emotions. Research is also performed to determine what role attention plays in emotion regulation and maintenance of well-being.

Project Features

Reception area
Open work space
Testing rooms
Eye tracking technology
Strict acoustical requirements
Work performed during evenings to accommodate operations in adjacent spaces and office/labs above and below LEDlab
Project completed on aggressive schedule within an active, occupied academic building

Location: Boston, MA
Delivery Method: General Contracting
Architect: Wilson Architects

“I'm writing to thank you and your team for your expert work in constructing the state-of-the-art Lifespan Emotional Development lab (LEDlab) for our newest faculty member in the Psychology Department, Dr. Derek Isaacowitz. Your team was mindful of the needs of others in the department as the construction process unfolded and was flexible in terms of scheduling specific aspects of the project so as to impact our ongoing research and teaching as little as possible. We now have a highly functional new laboratory in a key area of research – and a happy new faculty member." -Joanne Miller, PhD, Psychology Department Chair, Northeastern University

Northeastern University - Mugar Life Science Building

Mugar Life Science Building

The Mugar Life Sciences Building is home to the Psychology, Biology, and Chemical Engineering Departments, as well as the College of Pharmacy that houses numerous laboratories and classrooms. JM Coull completed multiple projects within this occupied building while keeping the facility accessible throughout construction.

Project Features

Monaghan Lab – new space for investigating the cellular and molecular basis of complex tissue regeneration through the study of axolotl salamanders, which can regenerate many limbs and organs
College of Science Student Center Services – advising suite updates, including advisors' offices, help desk, reception area, and study room
Biological Surface Engineering & Microfluidics Lab – (702 sf) renovation for lab for designing microfluidic devices for applications in clinical diagnostics & regenerative medicine
Medicinal & Natural Product Chemistry Lab – (1,320 sf) the updated lab provides research space for students and faculty in developing antidotes for multi drug-resistant bacterial infections

Location: Boston, MA
Value: $1.65 million
Size: 8,000 sf
Delivery Method: Design-Build & General Contracting
Architect/Engineer: Northeastern University

Towne School Limited Partnership

Old High School Commons

This complete interior and exterior gut and renovation of a historic school yielded 15 residential apartments to provide residents with an affordable housing option.

Project Features

20,000 sf total
Historical renovation
Successful negotiation of restrictions & requirements imposed by National Park Service
Restoration of original building features
New apartments comprising updated and modern furnishings combined with unique historical elements

Location: Acton, MA
Size: 20,000 sf
Delivery Method: Construction Management at Risk
Architect: Maugel Architects

Faith Evangelical Free Church

Church Renovation & Addition

JMC's scope called for a 7,700 sf addition and select updates to existing spaces for this church in Acton. Church members were involved in fundraising efforts, and some were also directly involved in the project itself – several members donated labor and services.

Project Features

7,700 sf addition
New multipurpose room with athletic floor and basketball hoop
New sprinkler system in existing kitchen
New kitchen with stainless steel appliances
New classrooms & offices with vibrant, modern color palette
Significant site work, including new septic and drainage system, rain collection recharge system, and new parking lot
Performed on an occupied campus; children attended vacation bible school during the summer and church services were held throughout project's duration

Location: Acton, MA
Value: $1.8 million
Size: 7,700 sf
Delivery Method: Construction Management at Risk
Architect: J. Ferrera Associates

Brae Burn Country Club

Pool House Renovation & New Paddle Tennis Hut

JM Coull completely gutted and renovated a pool house, adding valuable new concrete pool deck space, and built a new snack bar for Brae Burn Country Club.

Project Features

3,600 sf total
New paddle tennis hut
Renovations to existing pool house
Performed while maintaining country club operations
$120,000 in client savings through value engineering efforts

Location: Newton, MA
Size: 3,600 sf
Delivery Method: Construction Management at Risk
Architect: Olsen, Lewis, Dioli & Doktor

Nashawtuc Country Club

Expansion and Renovation

JM Coull completed this two-phase, fast-tracked project to provide Nashawtuc Country Club with additional space for it operations. Construction took place while the club was in operation and was completed, as scheduled, prior to a PGA golf tournament.

Project Features

10,000 sf total
Two-story, wood-framed building addition
Expanded pro shop
New second floor offices & conference facilities
Clubhouse renovations
New locker & shower/toilet facilities
New Grille Room
Front entrance with drive-through canopy supported by stone pillars
Stone archway with granite steps, lighting, and entry doors

Location: Concord, MA
Size: 10,000 sf
Delivery Method: Construction Management at Risk
Architect: OKS Architects

National Oceanic & Atmospheric Association

Greater Atlantic Region Fisheries Office

JM Coull was selected to construct a new 97,000 sf facility for NOAA to house the organization's fishery operations, Habitat Conservation and Restoration Departments, and Protected Resources Department. The Gloucester office hosts a variety of regional events through its outreach program, and the facility's museum serves as a venue to educate the public on marine life and conservation efforts.

Project Features

97,000 sf total
Offices & administrative areas
86,000 sf four-story main building
11,000 sf annex
Museum space for fishery displays & information

Location: Gloucester, MA
Value: $15 million
Size: 97,000 sf
Delivery Method: Construction Management at Risk
Architect: 4240 Architects

Collings Foundation

American Heritage Museum

This project involved design-build construction of a new 65,000 sf museum to display the United States' largest private collection of vehicles from the country's past military conflicts. Established in 1979, the Collings Foundation’s goal is to enable visitors to learn about the country’s heritage through "living history" events and interaction with historical artifacts.

Project Features

65,000 sf total
Diorama/exhibit space
Elevated viewing mezzanines
Lobby
Office & conference rooms
Kitchen
Common areas

Location: Stow, MA
Size: 65,000 sf
Delivery Method: Design-Build
Architect: AHP Architects

Loaves & Fishes Food Pantry

Building Addition

JM Coull constructed Loaves & Fishes' food pantry and administrative offices on Barnum Road in Devens, MA. The organization provides food and support to communities throughout Devens, Ayer, Groton, Harvard, Littleton, and Shirley. We continue to be involved with Loaves & Fishes through its annual toy drive during the holidays and participation in other events.

Project Features

Warehouse for food storage
Offices
Administrative areas
MEP systems
Donated building materials (lumber, paint, shingles, etc.)

Location: Devens, MA
Delivery Method: Construction Management

Charles River Community Health

Waltham Health Center

JM Coull renovated the two-story, 19,000 sf of space at the new Charles River Community Health (CRCH) facility in Waltham, MA. The renovation included primary care, dental, behavioral health offices and exam rooms, and full pharmacy services. The new location offers coordinated care that is patient centered, family friendly, and community focused

Project Features

Primary care suite
Dental exam rooms
OB/GYN & pediatric care facilities
Behavioral health offices
On-site pharmacy
Offices & administrative facilities

Location: Waltham, MA
Value: $2.6 million
Size: 19,000 sf
Delivery Method: Design-Build
Architect: DAI Architects, Inc

Lowell Community Health Center

101 Jackson Street Expansion

JMC renovated 72,000 sf of space across 3 floors in a former mill building in Lowell to create a new medical facility for Lowell Community Health Center (Lowell CHC) patients. The space enables Lowell CHC to expand its reach within the community by providing increased access to quality, affordable, and convenient medical care. The project marks JMC's third with Lowell CHC.

Project Features

Dental, optometry, and adult primary care medicine
30+ exam rooms
Testing rooms
Optical shop
Labs & imaging stations
Support spaces for Lowell CHC's CARINO program for HIV screening, counseling, and treatment
Core & shell fit-out (fourth floor) and compliance renovations (fifth & sixth floors)

Location: Lowell, MA
Value: $26 million
Size: 72,000 sf
Delivery Method: Design-Build
Architect: Durkee Brown Viveiros Werenfels Architects

Northeast Rehabilitation Hospital Network

Orthopedics Center

JM Coull renovated 6,000 sf of space in a former mill building to create a new orthopedic facility for Northeast Rehab. The space abuts Lowell Community Health Center’s expansion into the same building (renovations also performed by JMC), providing patients with a central location for a variety of medical needs. Northeast Rehab provides comprehensive outpatient services for adults and children, including programs for stroke recovery, brain injury recovery, orthopedic recovery, and sports injuries.

Project Features

Pediatric & adult physical therapy and occupational therapy rooms
Physical therapy gym
Pediatric gym
Sensory room
Reception/check-in
Offices & administrative areas

Location: Lowell, MA
Value:$700,000
Size: 6,000 sf
Delivery Method: General Contracting
Architect: JACA Architects

Emerson Hospital

Emerson Urgent Care Centers

JMC constructed two urgent care centers for Emerson Hospital, which were the first such facilities for the hospital. The 5,000 sf and 8,400 sf centers are located within Highland Commons in Hudson and The Point in Littleton, respectively. With board-certified physicians, both facilities treat patients with sudden illnesses that require immediate attention, but are not life threatening, such as a rash, cough, cut, or minor injury.

Project Features

Exam rooms
Radiology
Lab
Treatment rooms
Patient check-in and reception
Offices & administrative areas

Location: Hudson and Littleton, MA
Size: 13,400 sf
Delivery Method: Construction Management
Architect: Levi + Wong Design Associates

Acton Medical Associates (Acton)

Radiology Department Renovation

JMC converted the existing x-ray space to a digital format at Acton Medical's Acton location. The renovation enables radiology staff to provide patients with an enhanced, more efficient x-ray experience. As the organization's primary and largest medical office, the Acton site is extremely busy and required extensive coordination to remain open throughout construction.

Project Features

Additional radiology facilities
Patient changing rooms
Offices
Fast-track schedule
Dust, vibration, and noise controls
Infection control procedures
Interim life safety measures

Location: Acton, MA
Delivery Method: Design-Build
Architect: Maugel Architects

Acton Medical Associates

Medical Office Renovation

JM Coull completed a two-phase renovation project at Acton Medical's primary location in Acton, MA. The updated areas feature a warm, calming design aesthetic with increased functionality. All spaces remained open during construction activities, which required stringent planning and coordination to prevent interruptions to this busy medical practice.

Project Features

Phase 1 Renovations

Lab
Ultrasound area
Nurses' station
Third floor offices

Phase 2 Renovations

Reception & waiting room
Blood draw area
Employee break room
Lab offices
Second floor nurses' station

Location: Acton, MA
Delivery Method: Design-Build
Architect: Maugel Architects

Acton Medical Associates

Medical Office Renovation & Expansion

This renovation for Acton Medical Associates nearly doubled the size of the organization's Harvard, Massachusetts office. Through this project, the organization was able to expand its services for patients in Harvard and the surrounding towns.

Project Features

Exam rooms
Patient areas
Laboratories
Fire alarm system upgrades
Busy, occupied medical practice remained open during construction
Fast-tracked, seven-week construction schedule

Location: Harvard, MA
Size: 4,650 sf
Delivery Method: Construction Management at Risk
Architect: Maugel Architects

Acton Medical Associates

New Medical Office

JMC performed complete design and construction of a new medical office facility for Acton Medical Associates. The building, parking, drainage, and septic systems were successfully fit onto the organization's small footprint, which abuts the Town of Westford. The project supported Acton Medical's desire to expand its reach within the community to provide services to patients outside of its Acton and Harvard locations.

Project Features

4,000 sf new facility
New exam rooms with blackout window shades
Reception/patient check-in
Offices & administrative areas
Kitchenette
MEP systems
Extensive permitting process with two towns (Littleton & Westford)

Location: Littleton, MA
Size: 4,000 sf
Delivery Method: Design-Build
Architect: Maugel Architects

Hallmark Health System

Cosmetic Laser Center Fit-Up

JMC performed a design-build fit-up of this previously vacant space to create a new center for cosmetic laser treatment and surgery for Hallmark Health System. The center was created to offer patients more medically based solutions for cosmetic procedures than traditional facilities. All treatments are performed by registered nurses or nurse practitioners.

Project Features

Exam rooms
Treatment rooms
Reception area & waiting room
Offices & administrative spaces
Completed in an occupied building
Strict coordination with other building tenants, including an adjacent medical office suite

Location: Reading, MA
Size: 1,250 sf
Delivery Method: Design-Build
Architect: Payette Associates

Hallmark Health System

Urgent Care Center Fit-Up

JMC renovated Hallmark Health Medical Center to transform the former CT diagnostic area into an urgent care center. The facility offers patients of all ages high-quality, comprehensive, and rapid care. Unlike a stand alone facility, the center is supported by the other departments within the medical center, including imaging and blood draw.

Project Features

Six exam rooms
New entrance
Patient check-in & waiting room
Corridors & bathrooms
Infection control measures (double-wall/poly assemblies, temporary construction entrances, negative air machines, and tacky mats)
MA DPH requirements for interim life safety measures
Completed in occupied, operational building

Location: Reading, MA
Size: 2,700 sf
Delivery Method: Construction Management at Risk
Architect: JACA

Hallmark Health System

Melrose-Wakefield Hospital PACU Renovations

JM Coull was selected by Hallmark Health System to complete renovations to the patient Post-Anesthesia Care Unit (PACU) at Melrose-Wakefield Hospital. The outdated existing PACU was upgraded to provide patients with a modern, comfortable space while immediately recovering from surgery. The space contains a designated nurses' station, enabling hospital staff to quickly and easily monitor patients. Work was successfully performed without interfering with the activities in critical areas surrounding the PACU, including the operating room, newborn special care nursery, and cardiac catheterization lab.

Project Features

Nine open PACU bays
One isolation PACU
Support areas & new storage closet
Nurses station
JMC's second project at Melrose-Wakefield Hospital

Location: Melrose, MA
Size: 1,700 sf
Delivery Method: Construction Management at Risk
Architect: JACA Architects

Hallmark Health System

Melrose-Wakefield Hospital Café Renovation

JM Coull renovated the hospital's existing 1,900 sf café to incorporate a bright, modern design with improved efficiencies and flow pattern. The café serves visitors, staff, and patients in this 234-bed hospital.

Project Features

New seating area, including high-top counter with stools
New self-serve stations & equipment
Updated color palette and design aesthetics

Location: Melrose, MA
Size: 1,900 sf
Delivery Method: Construction Management at Risk
Architect: J. Ferrera Associates

Worcester Campus Services

VA Outpatient Clinic Demolition & Fit-Up

This two-phase project involved design-build fit-up for a new 13,000 sf Veterans Administration (VA) Clinic at Biotech Park on Plantation Street in Worcester. The property is owned by Worcester Campus Services and abuts and shares services with the UMass Medical School campus. The clinic is sited at Biotech 4, and offers patients audiology, podiatry, and optometry services.

Project Features

Complete demolition and fit-up of 13,000 sf space
Exam rooms
Registration/patient check-in
Specialized medical space (e.g. hearing testing booths)
Offices & administrative areas
New MEP systems, including emergency call system and security system
New pedestrian canopy at main entrance

Location: Worcester, MA
Size: 13,000 sf
Delivery Method: Design-Build
Architect: TRO JB

Worcester Campus Services

Hoagland-Pincus Conference Center Renovations

JM Coull performed selective demolition and renovations to 30,000 sf of interior space at UMass Medical School's Center for Mindfulness in Medicine, Healthcare, and Society. The facility focuses on incorporating mindful-based approaches into mainstream medicine and healthcare.

Project Features

Classrooms (for practicing stress reduction)
Offices
Conference rooms
Auditorium
Phased project on occupied campus

Location: Shrewsbury, MA
Size: 30,000 sf
Delivery Method: General Contracting
Architect: J. Ferrera Associates

Sensata

Second Floor Renovation

JM Coull renovated the 30,000 sf second floor of Sensata's US headquarters, reconfiguring the space to accommodate additional administrative areas to support the company's growing operations. The project features a light, modern design and was successfully completed in two major phases while keeping relocated staff and overall systems operational at all times. Sensata is a high-tech firm specializing in the production of mission-critical sensors and electrical protection for dozens of industries such as aerospace, agriculture, military, satellites, and alternative energy, among others.

Project Features

New executive board room
Multiple executive suites
Additional offices & cubicles
New, updated finishes throughout second floor
Updated MEP & fire protection systems

Location: Attleboro, MA
Value: $1.8 million
Size: 30,000 sf
Delivery Method: Construction Management at Risk
Architect/Engineer: SCI-X Science Studio

ADP

Office Upgrades

JMC performed significant interior upgrades to ADP's office building, including a reconfiguration of the existing 78,000 sf footprint to consolidate down to 58,000 sf. ADP is a leader in human resources services and software. The Marlborough site incorporates a welcoming color palette with custom finishes and architectural details.

Project Features

Demolition of existing auditorium for conversion into new meeting room
New offices, cubicles, conference rooms, and kitchenette
Custom finishes/artwork
Retrofit of existing MEP systems with additional electrical panels and transfer switch
Additional egress provided – removal of existing window to construct new exterior stairs and door at new meeting room
Performed in six phases, providing swing space for employee relocation during construction activities

Location: Marlborough, MA
Size: 58,000 sf
Delivery Method: Construction Management at Risk
Architect: Nelson Architects

US Citizenship & Immigration Services

New Office Building

JM Coull demolished the existing seven-story abandoned Lincoln Foods mill in downtown Lawrence to construct a new 62,000 sf office building for USCIS, the second of its kind in the state. The facility was built to increase access to USCIS's services throughout Massachusetts to assist those seeking to become US citizens. The Lawrence facility manages the application and interview process of its clients.

Project Features

Office space
Naturalization ceremony room
Waiting & consultation areas
LEED Silver Certified
Meets federal blast mitigation standards

Location: Lawrence, MA
Value: $12.6 million
Size: 62,000 sf
Delivery Method: Design-Build
Architect: Gorman Richardson Architects

Ross Express - Sutton Warehouse

New Warehouse & Offices

JM Coull constructed a new warehouse, distribution, and office facility for Ross Express in Sutton, MA.

Project Features

13,000 sf total
New cross-dock building - warehouse space & offices/administrative areas
New MEP systems
Lighting
Masonry
Roofing
Painting
Landscaping

Location: Sutton, MA
Size: 13,000 sf
Delivery Method: Design-Build
Architect: Woodbrier Associates

Ross Express - East Granby Warehouse

Cross Dock Express Distribution Center

JMC constructed this new 14,000 sf distribution facility for Ross Express in East Granby, Conn. The new building supports the company's shipping operations throughout New England.

Project Features

14,000 sf total
24 overhead doors – 12 on each side, allowing efficient transfer of materials between trucks
Sewer & water line redesign
Project delivered on time & within budget
Four 1-MW Caterpillar standby generators
Two cooling towers
Two rooft op units
Installation of pumps, VAVs, and 12" PVC piping
Accommodated second project added midway

Location: East Granby, CT
Value: $1.9 million
Size: 14,000 sf
Delivery Method: Design-Build
Architect: Richard P. Decoste Architects

New Balance - New Café

Renovations for New Café

JM Coull renovated approximately 4,500 sf of existing space to create a new café for this New Balance site, which is located in a historic mill in downtown Lawrence. The café serves more than 300 employees. New Balance is a multinational manufacturer of athletic footwear and apparel, as well as select sports equipment. The Lawrence location houses manufacturing, retail, and administrative operations.

Project Features

4,500 sf total
New serving stations & equipment
"Grab & Go" station
New seating
Exposed brick & wood floors and ceilings of original mill
Bathroom renovations
Performed in operational, occupied building

Location: Lawrence, MA
Size: 4,500 sf
Delivery Method: Design-Build
Architect: J. Ferrera Associates

New Balance - Office Fit-Up

Office Fit-Up & Sprinkler System Replacement

JM Coull completely removed and replaced New Balance's outdated sprinkler system in this former mill building. The project was vital to ensuring the facility contained a fire suppression system that was up to code, particularly considering the building's historical nature. The company employs more than 300 individuals at its Lawrence location, which houses manufacturing, retail, and administrative operations.

Project Features

500,000 sf (sprinkler)
Complete upgrade of existing sprinkler system, including installation of 11 miles of sprinkler pipe
Office fit-up of vacant space to create swing space for employee relocation
Completed ahead of schedule – 3 year construction schedule was originally planned; work completed in 18 months while enabling client to still pay over original 3-year duration
Performed in occupied, operational building
Completed in historic brick mill building
Located in congested, urban area of Lawrence, aff ording very limited exterior laydown area

Location: Lawrence, MA
Value: $4.8 million
Size: 500,000 sf (sprinkler), 20,000 sf (office)
Delivery Method: Design-Build
Architect: J. Ferrera Associates

New Balance - Boiler Replacement

Boiler Replacement

JM Coull replaced New Balance's boilers while we were already on site working on a sprinkler replacement project at the company's Lawrence site. While performing the sprinkler work, the building's two boilers failed, and needed to be replaced immediately. More than 300 employees work in this historical mill building, so ensuring the new boilers were up and running before the impending winter was critical.

Project Features

Replaced two existing 500 HP boilers with two 350 HP boilers
Installed Quadraplex pump boiler feed system for greater reliability
Removed existing boilers, equipment, and boiler room walls
Replaced existing boiler pad and boiler room slab on grade
Removed CMU and precast enclosure to reveal heavy fuel tank
Installed all required piping, fittings, valves, pipe insulation, and controls
Installed all gas piping and venting and fuel oil piping
Provided 3-ft x 120-ft dual wall Metalbestos exhaust stack and necessary breeching
Installed all louvers and dampers for combustion air and boiler room ventilations
Relocated roof drain line
Installed floor drains in the boiler room

Location: Lawrence, MA
Delivery Method: Design-Build
Architect: Mechanical Construction Services

FW Webb - Boston Facility

Warehouse, Distribution, and Wholesale Facility

JM Coull helped FW Webb, a leading plumbing supply company with locations throughout New England, expand into Boston by completing work on a new, two-story building.

Project Features

47,700 sf total
Offices
Showroom
Warehouse/distribution center
Hybrid solar/geothermal system
- 30 roof-mounted solar panels
- Closed-loop geothermal technology
Photovoltaic system
LEED certifi cation standards met

Location: Boston, MA
Value: $7.5 million
Size: 47,700 sf
Delivery Method: Design-Build
Architect: Design Science

FW Webb - Springfield Facility

Warehouse, Distribution, and Wholesale Facility

JMC provided design-build services for FW Webb's branch facility in Springfield, MA, which incorporated a solar energy system.

Project Features

67,000 sf total
Showroom
Office space
Warehouse
Self-serve area
302 kW rooftop solar photovoltaic system – off sets more than 430,000 pounds of carbon dioxide emissions annually, $38,076 first-year electrical savings

Location: Springfield, MA
Value: $7,000
Size: 67,000 sf
Delivery Method: Design-Build
Architect: Design-Science

HEADQUARTERS

JM Coull, Inc.
20 Powder Mill Road
Maynard, MA 01754 (978) 461-0330 (978) 461-0275 Construction management, design-build, and general contracting firm specializing in new construction and renovation projects in the life sciences, education, healthcare, commercial, advanced technology, and institutional industries.